If you have invested in beautiful and suitable facade pavers then you will want them last longer. This is why maintaining these pavers is crucial for their longevity and durability. Though most of the facade pavers will require less maintenance, some will require regular maintenance and care routine. This will increase their life span and aesthetic appeal. If you are a homeowner new to facade maintenance then things can be a little daunting for you. However, in this post, we will help you guide through the mention of the facade pavers. Continue reading the following for more ideas.
Best Maintenance Tips for Facade Pavers
Here are some of the most useful facade maintenance tips that will help you keep your facade pavers in the best condition possible.
Routine Cleaning
Facades are just like the exterior tiles and they have to face the harsh weather elements from hailing to rain, dust, debris, and snowstorms. Consistent cleaning serves as the initial measure to preserve the aesthetic appeal of the facade pavers. Over time, dust, dirt, and debris can accumulate, diminishing the pavers’ inherent beauty. By routinely removing this grime, one can effectively avert further accumulation.
Here’s what you can do:
You should use a soft-bristle brush or broom to sweep the loose debris, dust, and leaves. This will help you in avoiding any dirt buildup over time. Facade pavers are often installed in areas where a broom cannot reach. You can use a leaf blower to blow the leaves and dust. You can also remove any dirt and dust with the regular gardening hose. A bucket of water can also be helpful in this regard.
Cleaning facade pavers regularly is the most convenient and affordable way to keep them looking good. It doesn’t take much time but can help keep the stone looking stunning and last longer.
Washing Your Pavers
Washing your pavers every few months will keep them looking good for years to come. Just like regular sweeping, you don’t need any fancy equipment. You will need water, mild soap, a sponge, and a soft brush to wash.
Add a small amount of mild soap to a water-filled bucket. Mix a small amount of mild dish soap or stone-specific cleaner to create a solution.
Use a sponge or soft brush to clean the facade pavers with the solution. Scrub gently and focus on the areas with dirt and grime.
Once you are done, rinse it with the clean water thoroughly. Make sure no soap residue stays in the places as this can leave streaks or spots on the pavers.
You should avoid using harsh chemical cleaners. Harsh chemical cleaners can damage the natural stone surface. The natural color of facade pavers will remain in pristine condition with regular washing. Read also our guide on How to clean pavers without power.
Remove Weeds
Weeds are one of the most common problems with the facades. This usually happens with the joints in the face pavers. You might occasionally notice weeds growing up. When you notice the weed growth, remove them as soon as you can. Weed growth will not only look bad but it will compromise the facade structure over time. To remove the weeds you should:
Pull weeds by hand as soon as you notice them first. This is the most convenient way to remove weed as it will not have gotten thicker.
You can opt for specific, natural, nontoxic weed killers. This is especially helpful when the problem has become a routine matter. Make sure to select a weed killer that is safe for natural stone.
Facade sealing is also a good idea. This solution is long-term and effective. Also, there won’t be any weed growth after sealing the joint.
Keeping an eye on the weed growth will help you work on the root of the weed and eliminate any growth.
Stain Removal
Due to the nature of the facade, they can easily get stained. It is quite common for them especially if they are living in a high traffic areas. Stains can be any type from drinks, oil, food, or environmental factors such as algae. Leaving them untreated can result in permanent staining of the facade. Here is how you can different stain types.
Oil stains: For oil stains, you can use baking soda sprinkled over the oil stains. Let it sit for a few hours and it will absorb the greece. Then gently scrub the area to clean it.
Organic stains (leaves, bird droppings): These stains can be treated with mild soap and water. However, depending on the type of facade pavers, you can clean thoroughly with a mixture of vinegar and water or use Oxidant Stain Remover For Natural Stone and Porcelain Surfaces.
Rust stains: Rust is a bit tricky to clean. You should use the material-specific rust remover like Mar Gel Plus For Natural Stone Surfaces for better results.
While removing stains, do not scrub too hard, and never use any hard bristle brushes. They can damage the stone’s surface. The quicker you address stains, the easier they will be to remove.
Pressure Washing
A pressure washer is a good way to clean large areas of dirt accumulation. However, due to the nature of the washer, it can damage the facade pavers so caution is a must.
Use low pressure: It is recommended to use the power washer with the lowest setting to avoid any damage.
Start from a distance: Start spraying from a distance and move closely a little to remove any stubborn stains and dust.
Work in sections: Always use pressure wash in a small area. This will give you better control while cleaning.
Pressure washers can be tricky to use especially when it is your first time. If this is the scenario then hire a professional for better cleaning.
Apply Paver Sealant
Though most of the different types of facade pavers do not require any sealing for the sake of longevity and enhanced protection, sealing is important. To seal the facade, you should:
Choose the right sealant: Make sure you select the right type of sealant like Hidro SST Sealent and Aqua Treatment Sealer For Natural Stone. for the facade pavers. Natural stone facades such as stone veneers, porcelain veneer, or ledger stone will require breathable selent. It will let the moisture escape.
Follow application instructions: Select comes with the manufacturer’s instructions. So follow them before applying. Start by cleaning the facades, and wash them if required. Once they are dried, apply the sealant and wait for it to dry.
Reapply as needed: Selent cannot stay permanent. They will wear off over time. Reapply them within every three years.
Sealing your pavers is a small investment that pays off in the long run by preserving their appearance and durability.
Avoid Acidic Cleaners
You shouldn’t use acidic cleaners on natural stone pavers, like vinegar, lemon juice, or harsh chemicals. Stone can be damaged and discolored by acidic cleaners. Clean natural stone surfaces with mild, pH-neutral cleaners.
If there are accidental spills and acidic liquids (such as fruit juice or wine) on your natural facade pavers, clean the area immediately with water to prevent etching.
Professional Care and Maintenance
If you aren’t sure about taking care of facade pavers then you should hire a professional facade paver service. They can help you in taking care of the facade in the best possible way. They have a team of experts who have the equipment and knowledge to clean the facade without any impact. Just make sure to contact the right service providers like NT Pavers who understand your expectations and can offer you better guidance regarding facade care.
Conclusion
The facade is one of the most important parts that enhance the exterior beauty of any building. If you have chosen the one that complements your architecture then you have made a great choice. However, it is the maintenance and care routine that will determine how well they will keep their look in pristine condition. We have included every possible tip to maintain the facade pavers in the best way possible. If you have any concerns then contacting the our professionals is the ideal choice. They can guide you better about the facade pavers and even provide you with the best advice. Contact them anytime when you believe is essential.
نظرات ۰